Coffee maker guide: descaling senseo and tassimo

adminonApril 13, 2022February 11, 2022Leave a Comment

using a senseo coffee maker requires no hard work and gets you a good cup of coffee effortlessly. However, as with any other kitchen appliance that comes into contact with water, you should descale the senseo.

But briefly back to the preparation: you simply place a coffee pod in your senseo pad machine and select your cup size. You can brew a single cup or use both holders to brew two pods at the same time.

Once you have inserted the senseo pad and pressed the button, the senseo machine will start working. It pumps the right amount of water for your selected cup size to deliver a perfectly measured and balanced cup of coffee. The taste of the coffee is similar to that of filter coffee.

There are different senseo models, each with its own functions, which we will briefly describe in our article.

senseo coffee pods are also available in different flavors:

SENSEO® italian style INTENSO

SENSEO® strong

SENSEO® extra strong

SENSEO® classic

SENSEO® mild

SENSEO® extra mild

SENSEO® decaf

SENSEO® cafe crema

SENSEO® espresso

SENSEO® cappuccino

SENSEO® latte macchiato

The coffee in a senseo pad machine can only be prepared with coffee pods specially adapted for senseo. When buying, make sure the pads are compatible with senseo.

Extra tip

if you want to drink a cup of strong coffee, use 2 pods in the 2-pad holder and then press the 1-cup button.

What to expect in our article:

The two most important words when it comes to coffee are quality and comfort. Most of the time we want both, but often we have to make a choice. Some of us value quality, while others opt for convenience.

the senseo coffee machine is all about convenience. You can determine the taste of your coffee with the corresponding senseo coffee pad. Try out the different types of coffee and choose your personal coffee favorite.

The wear and tear of a senseo machine is usually less, since it is a pad system. This is a clean brewing system, the low maintenance requires. However, over time lime deposits the coffee taste is influenced by the following factors.

How easy it is to descale your senseo, we show you in our article.

Descaling a coffee maker guide

You want to know how to descale your regular coffee maker??

How to descale your senseo?

Your descaler indicator or the senseo signal lamp lights up with the word CALC after approx. 400 coffee runs on. Now you should descale your senseo.

We’ll show you how to do that here:

Prepare to descale the senseo:

Fill a pot with 1 liter of water.
Pour half of the descaler into the pot.
Pour the descaling mixture into the water tank of your senseo coffee maker until it reaches the maximum level.
Put the water tank back on your senseo coffee maker.

Start the first descaling cycle:

Press the power button to turn on your senseo coffee maker.
Insert the 1-cup pod holder with a used coffee pod into the coffee maker. close the lid and make sure it is locked properly.
Place an empty jug under the coffee spout to collect the descaling mixture.
Press the 2-cup button. Repeat this process until the water tank is empty.

If you have a senseo machine with a smaller water tank of for example. 1 liter, pour the rest of the descaling mixture into the water tank until all of the descaling mixture is used up.

The first descaling cycle is now finished, continue with the second descaling cycle.

Note

Never interrupt the descaling process.

Start the second descaling cycle:

Fill the jug again with 1 liter of water.
Pour the other half of the descaling agent into the pot.
Pour the descaling mixture into the water tank.
Put the water tank back on your senseo coffee maker.
Replace the 1-cup pad holder with the 2-cup pad holder and another used coffee pad. Close and lock the lid.
Place the empty pot back under the coffee spout.
Press the 2-cup button and let it run. Repeat this process until the water tank is empty.

If you have a smaller water tank, keep refilling the descaling solution until the bottle or the jug is empty.

All descaling cycles are now finished. Start rinsing the machine to remove the descaling solution.

Start the rinse cycle:

Replace the 2-cup pad holder with an empty 1-cup pad holder. Close the lid until it locks into place.
Rinse the water tank under the tap.
Fill the water tank with fresh water up to the maximum level indicator.
Place an empty jug under the coffee spout.
Press the 2-cup button to start the rinse cycle. Repeat this procedure until the water tank is empty.

Finish the rinse:

Rinse the water tank under the tap.
Fill the water tank with fresh water up to the maximum indicator.
Place an empty jug under the coffee spout.
Press the 2-cup button to start rinsing. Repeat this procedure until the water tank is empty.

You have now descaled your senseo and the next cup of coffee is already waiting for you with a delicious smell.

Spare parts store repair community

Broken coffee maker? No more problems!

Let us waxing together and the build the largest repair club in germany. What you get out of it? Receive a personalized newsletter tailored to your needs with tips and tricks about repair and home appliances.

Saving money sustainably should not just be an empty phrase!

Which senseo machines are actually available?

Senseo original (XL): basic model
Senseo viva cafe (duo select)
Senseo quadrante

As the name suggests, this is the original senseo model. You can make one or two cups of coffee at the touch of a button. This model is also available in an XL version. The water tank is larger. This way you can make not four, but seven cups of coffee in a row without refilling the water tank. In addition, some original models have the intensity select function. This function makes you a stronger cup of coffee.

Visually the viva cafe is very similar to the original. However, there are a number of differences.

Larger water tank, so you can make five cups in a row instead of four
Features a descaling light that indicates when your machine needs to be descaled
Also available in a duo select version. This version can change the brewing technique for a fuller coffee taste

The intensity select function is available on both senseo and allows you to adjust the coffee strength for a stronger cup of coffee.

The quadrante has a square design, so you can easily place it in a corner or against a wall in your kitchen. In terms of functions, this model is very similar to the original XL. The water tank has the same size. Otherwise, unfortunately, the senseo coffee maker does not allow you to adjust the coffee strength or the brewing technique. An additional drip tray prevents the coffee from splashing up.

Senseo switch
Senseo latte duo
Decide according to your taste

with the switch you don’t just brew one or two cups of coffee with a coffee pod – you can also brew a whole pot of filter coffee at once. the senseo switch models have a descaling light so you can clean the machine in time. The coffee strength can also be adjusted thanks to the intensity select function. The water tank has a volume of 1.2 liters. It is large enough to prepare seven cups of coffee without refilling.

The senseo latte duo coffee maker makes a cappuccino or latte macchiato with fresh milk effortlessly. This senseo machine has a milk hose that froths fresh milk from the external milk container. Besides the milk specialties, of course, you can also make a regular cup of senseo coffee. The coffee strength is again adjustable with the intensity select function. Thanks to the descaling light, you are always informed when it is time to descale your senseo. The water tank has a capacity of 1 liter, so you can make about six cups of coffee in a row.

No matter which machine you choose: there are many great manufacturers and super beautiful models. It’s always your individual coffee taste that counts.

Whether you’re an espresso nipper or a cappuccino slurper, we’ll all find our personal favorite in this wonderful selection.

Traffic accident

Traffic accident with a borrowed vehicle.

A quick trip to the grocery store in your friend’s car- But who pays in the event of an accident with a borrowed car?? We explain what you should look out for when you are driving a borrowed vehicle.

Who doesn’t know the situation: your own vehicle is in the workshop, so you borrow a car from a good friend?. But in the event of an accident with a borrowed car, the question quickly arises as to who pays for the damage incurred? An accident with a borrowed car can quickly put a strain on a friendship if it is not clear who will pay for the costs. The R+V infocenter tells you what to do in such a case and what you need to know before borrowing a car. information at a glance!
Traffic law

Ecall emergency call system becomes mandatory (video):

Legal situation in the event of an accident with a borrowed car?

In the event of an accident with a borrowed car, the motor vehicle liability insurance pays for the damage to the other party’s vehicle. This also applies to the case when the vehicle owner himself was not driving at all. However, it can then happen that the insurance downgrades the no-claims bonus. Depending on the amount of the accident, this can be several hundred euros per year, which the policyholder then has to pay. Depending on the discount level and the corresponding downgrade after the accident with the borrowed car, the amount of the additional insurance premium is determined. Thus, the accident can have an indirect financial impact on subsequent years. motor vehicle liability insurance covers personal injury, property damage and financial loss.

What does the comprehensive insurance pay in case of an accident with a borrowed car??

the comprehensive insurance covers the costs incurred on your own vehicle. However, whether costs after an accident with a borrowed car are covered by the insurance depends on the respective scope of the comprehensive insurance. Partial comprehensive insurance covers, for example, glass breakage, fire, explosion and theft, while fully comprehensive insurance is required for wilful damage and self-inflicted accidents. If a vehicle owner has not taken out comprehensive insurance, it can be costly for the lender, because he must then pay for the entire damage caused after the accident himself.
Traffic law

The loan agreement determines who pays

In order to determine in advance who will pay for the damage after an accident with a borrowed car, R+V insurance advises concluding a loan contract between the vehicle owner and the temporary user. such a rental contract can include accident damages, but also traffic tickets. The necessary documents can be found on the online portals of the major automobile clubs. R+V insurance also recommends recording any damage, such as scratches and dents, so that there are no uncertainties when the borrowed car is returned.

Lending a car: tips for car owners

To avoid being stuck with the costs of an accident involving a loaned car, vehicle owners should keep a few things in mind. Above all, you should be sure that the person temporarily borrowing the vehicle is in possession of a valid driving license. If the driver does not have a driving license, the comprehensive insurance will not pay. Although the liability insurance covers the regular damages, it could claim a portion back from the driver and the policyholder. In addition, the relevant insurance company could also file a criminal complaint because the person was driving without a license. In addition, the lender and the person borrowing the car should check beforehand whether the vehicle is still roadworthy and has a valid MOT sticker. If someone is registered as the sole driver with his or her vehicle insurance company, this person should not lend out his or her car. In the event of an accident, the insurance company could subsequently change the policy, which would result in additional premiums having to be paid in arrears. Depending on the insurance, reductions in benefits and contractual penalties are also possible.
Guide

The marten is subject to hunting laws in germany. this means that catching or even killing a marten is only allowed with a permit and will otherwise be punished.

The marten is a carnivore and predator. Martens are not dangerous to humans, but they can cause considerable damage to vehicles, which can result in lead to dangerous situations can. Even though it is said that many marten species do this, this behavior is unique to the stone marten.

But already as a single marten species they direct annual damage of up to 60 million euros on and damage so more than 200000 car owners. In this case, the owner is often left with the costs, because not every insurance policy covers this damage. Not to mention the possible consequences that can be caused by bitten brake lines or burning insulation materials can be created.

precaution with a marten deterrent is the best protection. For this, we answer the following questions in our guide on heimwerker.De the most important questions and clarify about the most efficient methods of marten defense on.

1. Why do martens bite hoses??

Martens often use hoses, cables and insulation material to build a nest.

The assumption that the smell of rubber and cable sheathing really attract the marten is obvious. However, this is not the case. Rather, the engine compartment of a car offers a good and often warm shelter for animals. Martens particularly like to use this.

In the process, they may try to building a nest from insulation materials and thereby damage and distribute it.

Furthermore martens possess a pronounced territorial behavior, what particularly endangers commuter vehicles. If a marten marks the engine compartment as its territory and another marten elsewhere also finds this engine compartment interesting, they defend their territory with wild biting attacks even without opposing animals.

Cables and hoses are particularly susceptible to biting. This aggressive territorial behavior is particularly pronounced during the mating season.

Notice: the mating season of stone martens is in june to august. Here you should pay particular attention to marten damage in the car.

2. marten bites: possible consequences of a marten attack

tracks like these should prompt you to look for possible marten damage in your car.

martens do not selectively choose their "opponents" in the engine compartment, so they can fall victim to anything that can be bitten – primarily cables, wires, hoses and insulation material.

Particularly dangerous are their very fine and pointed teeth, so that damage is seldom immediately recognizable and its consequences can lead to accidents in road traffic.

2.1. Bitten coolant hoses

Leaky coolant hoses don’t have to show up as a puddle under the car.

Often the cooling water only leaks out when a heating leads to overpressure. Engine overheating and breakdowns are the consequences.

2.2. Damaged cables and wires

Damaged cables and wires in addition to malfunctions, in the worst case, can lead to a short circuit and fire in the engine compartment. A prior detection of the damage is rarely possible.

2.3. gnawed brake lines

It is very dangerous when brake lines be bitten. Without pressure there is no loss of fluid and the damage is not visible.

In operation, however, the brake loses its effect, as no brake pressure can be built up in a leaking hose. Possible accidents can hardly be avoided.

Notice: besides the risk of accidents and breakdowns, martens also sometimes cause enormous costs. If, for example, an axle boot is damaged, this can result in high repair costs, which are rarely covered by insurance.

3. marten deterrent for cars: 5 types of targeted precautions for marten defense

Martens are very shy animals that tend to avoid potential dangers.

Breakdowns and damage caused by accidents are usually covered by the insurance policy or the liability insurance, but in most cases the vehicle owner is left to pay for the repairs.

Therefore Prevention is better than paying afterwards. There are many ways to protect against marten attacks, but each marten is an individual animal and cannot be calculated.

However, one note beforehand: even if the simple use of a marten trap appears tempting, the use of these is promised only to persons with an appropriate authorization.

3.1. Blocking the access of martens

Where the marten can’t get in, it can’t damage anything. It is therefore helpful fencing off open entrances with wire mesh. Although this is rarely possible over the entire surface of the car, martens are also very shy and therefore new large devices act as a deterrent for a certain period of time.

It must be remembered, however, that such modifications and conversions mean interfering with the vehicle and are therefore are often only available on a flexible basis.

3.2. Professional engine bulkheading

Modern engines are now so tightly fitted in the vehicle that there is hardly any space or openings left. Some vehicle manufacturers offer cars with integrated marten protection by additionally closing last openings with bristles or perforated plates.

3.3. marten repellent through ultrasound

High voltage in the car can deter martens without harming them.

Like many other animals, martens react to high-pitched sounds in the ultrasonic range. With sufficient sound pressure and from a closer distance, these sounds have a painful effect and can effectively drive martens away.

However, a complete distribution of sounds with high power is rarely achieved without disturbing passers-by in the surrounding area. Here a higher financial expenditure and a professional installation are worthwhile.

3.4. current for the expulsion of martens

Probably the most effective variant is the use of harmless high voltage.

As in the case of a pasture fence, electric shocks are emitted via two contact surfaces, which are perceived as painful, but are neither lethal nor cause injury.

The installation and positioning of the contact surfaces should be well thought out and professionally executed become.

The advantages and disadvantages the method:

advantages

Most effective method
Marten does no harm

disadvantages

installation must be carried out by professionals

3.5. Marten expulsion by scent spray

Just as certain odors attract animals, they can also have a repellent effect. With the right and long-lasting scent, martens will be kept away permanently.

However, when buying such scented sprays for the car, it is difficult to see how effective this works. In addition to your own tests, you should also pay attention to customer reviews on the internet.

marten spray for cars on amazon.View "

photo credits: adobe.Stock/were, adobe.stock/horst schmidt, adobe.stock/zoltan galantai, adobe.stock/were, adobe.Stock/utirolf (chronological resp. Sorted according to the order of the pictures used in the buyer’s guide)

editor and copywriter with favorite topics: plants, sustainability and artistic hobbies. With a lot of dedication, he researches for you what you and your fellow plant inhabitants need for a healthy and good life and also gives helpful tips in the area of DIY.